NASOMETER
Tools needed:
flat head screwdriver
Phillips head
screwdriver with removable tip
11/32 socket with nut
driver
Remove the 2 screws from the
bottom of the front end plate labeled A.
Remove the 2 screws from the
bottom of the back end plate labeled B.
Unscrew the 2 screws from the
back of the end plate labeled C and remove the end plate.
Remove the stopping bracket
labeled D from the bottom of the nasometer.
Remove the 4 brown screws
labeled E from the bottom of the nasometer.
Now slide the outer covering
off of the nasometer.
Remove the 2 screws from the
top inside of the front end plate. They are labeled F. Now remove the end plate.
You can now remove the front
stopping bracket from the bottom of the nasometer. It
is labeled G.
Remove the speaker labeled H.
Remove the power supply
labeled I.
Next remove the motherboard
labeled J.
Eject the fuse from the back
of the nasometer.